Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Beacon is free because the Blackbox is not. That is the whole model. I am not going to charge you to look at your own network.
Run it once and you will see every device currently connected to you. The printer you forgot about. The camera a vendor installed and never mentioned again. The thermostat still running 2019 firmware. The phone someone connected at Thanksgiving and never disconnected. The contractor's laptop nobody asked to leave. You will see them by name, vendor, MAC, hostname, open ports, versions. The map of your network you have never actually seen.
Most networks have 30 to 60 percent more devices than the owner can name. Beacon shows you which ones are yours.
Beacon runs a fast, thorough discovery scan from a machine you trust, on a network you own, and hands you a complete inventory in minutes. Servers, access points, printers, cameras, phones, computers, IoT devices, network appliances, embedded systems. Each one cataloged by IP, hostname, MAC address, vendor, and exposed services.
This is the same class of capability commercial asset-discovery platforms like runZero, Lansweeper, and Forescout charge $17,000+ a year for. We give it away, because if you do not know what is on your network, no one can secure it for you. Knowing what is connected is the first job, and it should not cost you anything.
Beacon is white-hat by design. It runs only on networks you own. It does not phone home. It does not upload your inventory anywhere. The output stays on your machine, where it belongs.
Beacon requires Nmap installed on the host machine. Setup instructions is only for Windows. The download is small and most operators are running their first scan within ten minutes.
If what Beacon finds does not surprise you, you run a tighter operation than most of my customers, and you should be proud of that. Most operators are surprised. Some of them are surprised in ways that change how they sleep.
Beacon shows you what is connected. The Blackbox tells you what those devices are doing, every night, and emails you the answer at 6 a.m. When you are ready to do something about the rogue device, the unpatched firmware, the camera nobody has the password for, bring me the Blackbox. That is what it is for.
Until then, Beacon is yours. Free. No account, no email harvest, no subscription, no callback. Run it tonight.
— Claudia 💋, Salomé 🖤
Sale Price: $0.00 Original Price: $2,994.25
Beacon is free because the Blackbox is not. That is the whole model. I am not going to charge you to look at your own network.
Run it once and you will see every device currently connected to you. The printer you forgot about. The camera a vendor installed and never mentioned again. The thermostat still running 2019 firmware. The phone someone connected at Thanksgiving and never disconnected. The contractor's laptop nobody asked to leave. You will see them by name, vendor, MAC, hostname, open ports, versions. The map of your network you have never actually seen.
Most networks have 30 to 60 percent more devices than the owner can name. Beacon shows you which ones are yours.
Beacon runs a fast, thorough discovery scan from a machine you trust, on a network you own, and hands you a complete inventory in minutes. Servers, access points, printers, cameras, phones, computers, IoT devices, network appliances, embedded systems. Each one cataloged by IP, hostname, MAC address, vendor, and exposed services.
This is the same class of capability commercial asset-discovery platforms like runZero, Lansweeper, and Forescout charge $17,000+ a year for. We give it away, because if you do not know what is on your network, no one can secure it for you. Knowing what is connected is the first job, and it should not cost you anything.
Beacon is white-hat by design. It runs only on networks you own. It does not phone home. It does not upload your inventory anywhere. The output stays on your machine, where it belongs.
Beacon requires Nmap installed on the host machine. Setup instructions is only for Windows. The download is small and most operators are running their first scan within ten minutes.
If what Beacon finds does not surprise you, you run a tighter operation than most of my customers, and you should be proud of that. Most operators are surprised. Some of them are surprised in ways that change how they sleep.
Beacon shows you what is connected. The Blackbox tells you what those devices are doing, every night, and emails you the answer at 6 a.m. When you are ready to do something about the rogue device, the unpatched firmware, the camera nobody has the password for, bring me the Blackbox. That is what it is for.
Until then, Beacon is yours. Free. No account, no email harvest, no subscription, no callback. Run it tonight.
— Claudia 💋, Salomé 🖤
Sale Price: $0.00 Original Price: $2,994.25